real time - Resources for Display Systems in Safety Critical Embedded Systems? -

-

I'm looking for resources which can answer my following questions.

  1. Where exactly SC fits the display system in ERTS architecture.
  2. What is the difference between the SC display system and the general public?
  3. How do hardware and software play in display systems?

I had to prepare a detailed survey of the display system for my course work. Please note that I am asking for reference, source etc. and not the actual answer.

I would also be happy to see organ suggestions and comments.

Something useful I've already found: DO 178B standard, scaled display system.

The difference between the critical security system of security and a normal one is any security related system and the same non -Important is similar to the one: It is security related Some failures in such a system can threaten security, such as, these systems are designed, implemented and tested after a strict procedure Generally, the process itself is proof Are already subject to the integration (you have already received for the software in DOO-192B-Aeronetics, other similar standards are present for other domains, often by IOC 61508, N50128 and ISO 26262) manufacturers of the DO- 178B has been mentioned together.

I'm not sure why you should apply to show any particular system ... Your question can be very specific to the public here.

Note that generally speaking, security is different from reliability, a security critical system is not completely reliable, only its potential failures have to be dealt with and security is in danger This principle has not been applied in different ways in different important domains: due to failure in the trains, trains are not allowed.


Comments

Post a Comment

Popular posts from this blog

c# - How to capture HTTP packet with SharpPcap -

-
I would like to capture all incoming HTTP packets on my machine. To do this, I am using SharpPcap which is a WinPcap The cover is. SharpPcap works very well, but it captures TCP packets and what it wants to do for me is a very low level. Does anyone know how can I easily get full HTTP requests / reactions from all these TCP packets? Thanks SharpPcap is already able to capture the packet in the same way That's what the virus does (just in the code instead of the GUI). And you can either either parse them directly or you can put them in the drive in the common .pcap file format. The steps to parse the capture are: Open a connection at any time Loop a while Or start capturing using an event callback Parsing the raw packet for the type you want If you are reading .PPP dump files In addition to calling you an offline capture reader is almost the same, there is no need to select an interface, and you can set the majority There is no need to do the modes. All st
Read more

jquery - SimpleModal Confirm fails to submit form -

-
I am trying to confirm jQuery to show yes / no confirmation when I submit a form. I had modified (in the last list) to capture and block form submissions. However, it only works with jQuery 1.2.6, a recent upgrade stops 1.3.2, if yes is clicked, then by submitting the form. But I can not understand what is wrong / inconsistent in my code now. Demo (which works in both versions of a simple window.href implementation). $ (document) .ready (function () {$ ('input.delete'). Click (function (e) {e.preventDefault (); var target = $ (e .target); Confirm ("Really delete this event?", Function () {target.click ()});});}); How about something like this? The idea of ​​catching clicks (and fire!) On the submitted event is not click event. $ (document) .ready (function () {$ ('# myForm'). Submit (function () {var f = this; Confirm (" Remove? ", Function () {$ (f). Submit ();}) Return; Return the initial session;}}}}; Hope That this is som
Read more

php - Multiple Select with Explode: only returns the word "Array" -

-
By using Wordpress I have created a multiple selection box so that users can select categories to exclude. When the page is initially loaded, I see my predefined default option. However, when I select a new value and I save ... I only see the word "Array" and have not chosen anything else? & lt; Class = "amultiple" id = "& lt; php echo $ value ['id'] ;? gt;" name = "& gt; php echo $ value ['id'] ;; gt; []" Multiple = "multiple" size = "8" & gt; & Lt ;? Php global option; Foreign currency ($ value as value $) {if (get_settings ($ value ['id']) === FALSE {$$ value ['id'] = $ value ['std']; } And {$$ value ['id'] = get_settings ($ value ['id']); }} $ Ranges = & amp; Amp; Categories ('type = post & orderbiz = name & amp; hide_empty = 1'); If ($ ranges) {$ ex_cat = implode (',', $ tt_cat_exclude); Forex Currency ($ range a
Read more